How to maintenance and maintenance, tripod turnstile?is a lot of tripod turnstile?problems often units used, the three points with seven minutes to maintain, and car, need maintenance and maintenance, so the tripod turnstile?system timing regular preventive maintenance and is to be done, and according to requirements, many users are little or no maintenance maintenance, such as machine manufacturer, until you have broken to replacement parts and components, which often affects the service life of tripod turnstile. Shenzhen Tongda zhi technology company is a manufacturer specialized in producing tripod turnstile. It knows the whole structure of the tripod turnstile, and today we will share how to maintain tripod turnstile?for new and old customers, so as to increase the service life of tripod turnstile.
?Tripod turnstile machine maintenance is the core of the whole machine maintenance, machine rotation depends on movement, movement under the long time work also need maintenance, generally small maintenance once a month, according to the number of work, general work 6-100000 small service time, big maintenance once half a year, 30-600000 times big maintenance time, maintenance should master professional maintenance operation, when cut off power supply first, clean the dust, be careful not to damage the original circuit, check the abrasion of damping rubber is, whether you want to change or replace, clean surface, cannot use diesel oil or water cleaning, that day will be corrosion of damping rubber, the washing water is ok, tighten the fittings, positioning arm surface besmear butter, check other vulnerable parts, for example, positioning arm, etc., to replace the gap larger than 2 mm, usually have a damping rubber is not easy to wear.tripod turnstile maintenance Check the opening solenoid valve. The electromagnetic valve is not enough magnetic force, not enough to see if the output terminal voltage is 24V, less than 20V circuit has problems, the suction is not enough. The drop bar electromagnet is the same, is also 24V, not enough to check the circuit.tripod turnstile maintenance Don"t inside the solenoid valve oil or butter, the inside is clean, no dust, dust valve core and valve body is not fully combine, resulting in the insufficient suction, with oil or butter, valve core and valve body with sex, can also lead to not enough suction. Ii. Circuit maintenance:In front of the solenoid valve, the voltage 24V is not reached to see if the plug is loose. Have put the wrong position, the position thrust fault can also lead to voltage is not enough, only 17 v, brothers are great for customer maintenance is ever encountered similar problems, check the insurance is in good condition, the light is normally on, the direction of the light is not in accordance with the regulations in and out of the instruction, have the input voltage of 220 v, transformer work is normal, the transformer output voltage have two road, all the 24 v, the other all the way to the 12 v, circuit aging degree, etc.tripod turnstile maintenance A firm replacement is needed, leaving no problem. It is determined to put an end to the power supply on the main board, and it is not reasonable or scientific for individual customers to take the voltage at the main board of the brake machine at any time. At any time the gate and brake are in danger of burning.
General tripod turnstile using time is long, the surface rust is the macula, etc., are difficult to be so need to clear in time, general appearance clean up once a day, with a soft cloth and fossil powder will case looks polished and coated with anti-rust oil, just coated with anti-rust oil not wipe with the hand, wait for 3 to 5 hours natural drying can hand contact, outdoor tripod turnstile met rainy day, don"t use, cut off power supply, thunder and heavy current flows through the bad motherboard and entrance guard board, in case of leakage, the water will produce the leakage situation, the rain stopped to wipe case, check the circuit to work again, indoor surface scratches, tripod turnstile looking for professional master repair, maintenance machines along the grain, grain was generally good. http://www.speedgatefactory.com/product/tdz-s338-slim-tripod-turnstile/
+86 755 28234592-806